Lexmark 4227-X00 User Manual
Page 76
Advertising
Repair Information
4-13
4227-X00
6. Loosen the two tension pulley plate screws [2]. Pull upward on
both sides of the belt to move the tension pulley plate as far as
possible toward the center of the printer, then retighten the large
screw.
7. Remove the belt from the carrier motor pulley.
8. Push the tension pulley toward the outside of the printer and
remove its shaft through the large part of the keyhole. Push the
pulley upward and remove it to free the carrier belt.
Advertising