Lexmark series x5100 - Manual (Page 5)

1
Learning about your All-In-One
You can use the Lexmark X5100 Series to do a variety of things. A couple
of important things to note:
• You do not need to attach your All-In-One to a computer to make
copies.
• You do need to attach your All-In-One to a computer to send faxes.
Note: The computer must have an internal modem or be
connected to an external one and the modem must be
connected to a phone line.
• If your All-In-One is attached to a computer, you can use the
operator panel or the All-In-One software to create your projects.
Setting up your All-In-One
Follow the instructions on your All-In-One setup documentation to install
the hardware and software. For setup troubleshooting, see page 46.