Lexmark series x5100 - Manual (Page 9)

5
Press: When you want to:
Black Copy Make a black and white copy using the current copy
settings. For help, see page 20.
Color Copy Make a color copy of a color image using the current
copy settings. For help, see page 20.
Copy Quality Select a copy quality: Quick, Normal, Better, or Best.
E-mail, File,
Software Select a new scan destination. For help, see page 22.
Note: Use this button when the All-In-One is attached to
a computer.
Left arrow Decrease a menu number or scroll backward through a
list of options on the display.
Right arrow Increase a menu number or scroll forward through a list
of options on the display.
Number of Copies Specify the number (1-99) of copies to make.
Options Scroll through the menu headings. For help, see page 6.
Photo Copy Begin a photo copy job using current Photo Options
settings (the highest quality scan and print resolutions).
Photo Options Select the quantity and size of photograph reprints.
Power Turn your All-In-One on or off.
Note: If your All-In-One is on, you can turn it off, and then
enter the state of lowest power. To do this, hold the Power
button for at least 5 seconds.
Reduce/Enlarge Reduce or enlarge your original document by
percentage, to Fit to Page, or to poster size.
Select Choose the option currently shown on the display.
Start Fax Scan and send a document to the fax software.
Note: The All-In-One must be attached to a computer
with a modem.
Start Scan Scan an image using the current scan settings, and then
send it to a program.
Note: The All-In-One must be attached to a computer.
Stop/Clear • Cancel a scan, print, or copy job in progress.
• Exit a menu and return to the default settings.