Lexmark series x5100 - Manual (Page 53)

49
• The fax driver you want to use is the default fax driver in the
All-In-One Center.
Note: DSL (digital subscriber line) and cable modems are not
supported.
Transparencies or glossy photo papers stick together
• Remove each page as it exits the printer and let it dry completely
before stacking.
• Use a transparency or photo paper designed for an inkjet printer.
Transparencies or photo papers contain white lines
• Clean the nozzles. For help, see page 42.
• Wipe the nozzles. For help, see page 44.
• Clean the scanner glass. For help, see page 51.
Envelopes do not feed properly
If regular paper feeds without problems, make sure:
• You load the envelopes correctly. For help, see page 16.
• You use an envelope size supported by the All-In-One and select
that size before you start your print job.
• You have the correct Paper Type and Size selected in Print
Properties.
Document does not print
• Make sure the cartridges are properly installed.
• Use an undamaged USB cable.
• Check your All-In-One status to make sure your document is not
being held or paused. To check All-In-One status:
1 Click Start Settings Printers.
2 Double-click the Lexmark X5100 Series icon, and then click
Printer.
3 Make sure no check mark appears next to Pause Printing.