Lenoxx Electronics CDR1906 - Manual (Page 10)

IB-CDR1906(AD-CL)-WM-E-012105
7. Listening to the radio
Connect the supplied AC power cord (see Setting the Clock).
Slide the FM/AM/CD switch to AM or
FM position and the BUZZER/AUTO/
OFF/ON switch to ON.
1
2
TUNING
control
Adjust the VO LUME control for
desired loudness.
Slide the BUZZER/AUTO/OFF/ON
switch to OFF position to turn off the
radio.
3
4
9
MIN MAX
LEFT SIDE VIEW RIGHT SIDE VIEW
FM/AM/CD
switch
VOLUME
control
PHONES
jack
BUZZER/AUTO/
OFF/ON switch
ALARM
switch
CD
AM
FM
AUTO OFF
BUZZER ON
TUNING FM
MHz
AUTO OFF
BUZZER ON
Tune into the station you prefer using
the TUNING control. Adjust for the
clearest sound. The display will show
you the frequency of the station tuned
in. This is useful when you know the
station’s frequency.
NOTE:
This set uses an analog (rotary) tuner with a digital display. The digital display is
very useful when locating your favorite station and also assists you to pinpoint
the exact tuning frequency. This set does not have radio memory presets.
Remember to slide the BUZZER/AUTO/OFF/ON switch to BUZZER or AUTO
position after listening, so that the buzzer alarm, CD music or radio will wake
you up at your preset time. Make sure the volume control is adjusted loud
enough to wake you up. If you want to listen to the radio for a short time, simply
press the sleep button. See page 12 for full sleep instructions.
IB-CDR1906(AD-CL)-WM-E-012105.pmd 2/3/2005, 12:08 PM 10