Lenoxx Electronics CDR1906 - Manual (Page 9)

IB-CDR1906(AD-CL)-WM-E-012105
6. Playing CD in programmed or random order
To cancel Programmed Play
Press the STOP button to stop the programmed play. The programmed memory will
be lost only when the BUZZER/AUTO/OFF/ON switch is slided to OFF position or
the CD door is opened.
8
You can make a program of up to 20 tracks in the order you want them to be played.
1. Slide the BUZZER/AUTO/OFF/ON switch to ON position and
the FM/AM/CD FUNCTION switch to CD position. Wait until
the total track number shows in the display and the CD disc is
not rotating.
2. Press the PROGRAM/REPEAT button. The letters “PROG”
will show and two zeros “ ” will flash.
3. Press SKIP/SEARCH buttons or to select the tracks
you want to program in the order you want.
4. Press the PROGRAM/REPEAT button to confirm. The two
zeros “ ” will flash for your next selection of the track.
5. Repeat steps 3 and 4. You can program up to 20 tracks.
6. Press
to start programmed play. The letters “PROG”
will show in the display.
To change the current program
Just create a new program following the programming procedure.
1. Programmed Play
FM/AM/CD
function switch
PROGRAM/REPEAT
button
PLAY/PAUSE
button
BUZZER/AUTO/
OFF/ON switch
(on the left side)
SKIP/SEARCH
buttons
STOP button
PROG
PROG
2. Random Play
To play the songs in random order
RANDOM button
To resume normal play
Press the CD RANDOM button again, the letters “RAND” will disappear.
RAND
During play or in STOP mode, press the CD RANDOM button,
the letters “RAND” will show in the display, and the set will play
all the tracks in random order.
Press SKIP/SEARCH button to skip to the next random song.
IB-CDR1906(AD-CL)-WM-E-012105.pmd 2/3/2005, 12:08 PM 9