Lenoxx Electronics CDR1906 - Manual (Page 4)

IB-CDR1906(AD-CL)-WM-E-012105
1. Setting the Clock
1
Connect the AC power cord into a live wall outlet.
3
Hold the CLOCK SET button
down, and press the
MINUTE button until the right
minutes time shows in the
display.
Hold the CLOCK SET button
down, and press the HOUR
button, until the right hour time
is shown in the display.
2
Clock display will show “12:00 ” flashing.
PM will show in the
display for PM time.
If the plug of the AC power cord does
not match your outlet, do not force it.
Reverse it and try again. This plug is
polarized and only fits one way into
the wall outlet.
Example: 10:26 P.M.
3
HOUR
MINUTE button
HOUR button
CLOCK SET
button
Large display for
clock, radio & CD play
CLOCK
SET MINUTE
CLOCK
SET
DIMMER button
In case you want to reduce the brightness of the
display when you are sleeping, you can press the
DIMMER button.
NOTE: To change PM to AM time, advance the clock time 12 hours.
IB-CDR1906(AD-CL)-WM-E-012105.pmd 2/3/2005, 12:08 PM 4