Lenoxx Electronics CDR1906 - Manual (Page 5)

IB-CDR1906(AD-CL)-WM-E-012105
2. Setting the Alarm Time
To set ALARM 1, slide the ALARM switch to position 1,
the words “ALARM 1” will show in the display.
To set ALARM 2, slide the ALARM switch to position 2,
the words “ALARM 2” will show in the display.
NOTE 2: If you want this set to wake you up in the morning, the letters “PM” should
not show on alarm time (when pressing ALARM SET button), this means
AM (morning time). To change PM to AM time, advance the clock time 12
hours. To have this set wake you up, slide the BUZZER/AUTO/OFF/ON
switch to AUTO or BUZZER position. Auto position will wake you up to CD
or RADIO. Buzzer position will have a sound buzzer to wake you up.
NOTE 3: To wake to ALARM 1 time, slide ALARM switch to position 1.
To wake to ALARM 2 time, slide ALARM switch to position 2.
To wake to both times, slide ALARM switch to position 1+2.
1
3
2
Release the ALARM SET button, the clock display will show the normal time of day.
4
Slide the B UZZE R/AU TO/O FF/O N sw itch to
BUZZER or AUTO position. Press the ALARM SET
button to check the alarm time.
Press the ALARM SET button together with the HOUR button until the display
shows the desired alarm hour time.
Press the ALARM SET button together with the MINUTE button until the display
shows the correct alarm minutes.
This set has dual alarms. You may set ALARM 1 to wake you at a certain time, or
ALARM 2 to wake you at a different time, or ALARM 1+2 - both alarms will sound
at the time you set.
This feature is useful for a husband & wife waking up at
different time or a single person who likes to wake up at
different time during weekdays and weekends.
HOUR button
MINUTE button
ALARM switch
(1,2,1+2)
BUZZER/AUTO/
OFF/ON switch
LEFT SIDE VIEW
AUTO OFF
BUZZER ON
NOTE 1: When the ALARM switch is in the ALARM 1+2 position, you can’t set the
ALARM time.
SLEEP button
ALARM SET button
4
For additional clock & alarm points, see pages 11 and 12.
IB-CDR1906(AD-CL)-WM-E-012105.pmd 2/3/2005, 12:08 PM 5