Lifescan OneTouch Profile blood glucose monitor - Manual (Page 23)

22
CAUTION: To reduce the chance
of infection:
• Never share a lancet with another
person.
• Always use a new, sterile LifeScan
Lancet. Lancets are for single use only.
• The Penlet ™ Plus Sampler should be
used by only one person. However, in
the event the sampler is shared with
another person, always use a new
lancet and a new or disinfected cap.
• Avoid getting hand lotion, oils, dirt,
or debris in or on the lancets and the
Penlet Plus Sampler.
GETTING A DROP OF BLOOD Step 1: Insert a Lancet into the
Penlet
™ Plus Adjustable Blood Sampler.
To remove the Penlet ™ Plus Cap, twist
the cap counterclockwise. Insert a lancet
into the lancet holder. Push down firm-
ly until the lancet is secure in the hold-
er. Do not twist the lancet. For best
results and safety, use only LifeScan
lancets. (Note: To reduce the chance of
contamination and to prevent the cap
from rolling away, set it down on a flat
surface with the small hole pointing up.)