Lifescan OneTouch Profile blood glucose monitor - Manual (Page 43)

BEEP PROMPTS
The One Touch ™ Profile ™ Meter uses
beeping tones to signal various steps in
the meter procedures.
The beep option is seen immediately
after entering the set-up
mode. The current set-
ting will automatically
appear on the display.
With the “ON” setting, the meter will
continue to provide beep prompts dur-
ing the test procedure.
ON
BEEP
M-MOVE C-CHANGE
42
Press the C button to
turn off the beep
prompts. The following
display will appear.
You may now turn off the meter or
press the M button to move to the
next option.
OFF
BEEP
M-MOVE C-CHANGE