Warning – Lennox Hearth ELITE 875022M User Manual

Page 12

Advertising
background image

12

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

READ WARNINGS ON THIS PAGE BEFORE PROCEEDING. FOLLOW THE

LOG PLACEMENT INSTRUCTIONS EXACTLY

1. Remove the front glass enclosure panel (see Glass Enclosure Panel

Removal and Installation Instructions, Page 11 ).

2. Remove the following from firebox; log set, bag of embers and bag

of vermiculite. Handle logs carefully to prevent breakage.

3. Ensure the Grate is properly installed in the firebox with the 4 legs

of the grate fitting into the 4 dimples on the firebox floor.

4. Placement of Glowing Embers -

Separate the Embers (rockwool) into pieces about the size of a quarter

(see Figure 5). Keep the pieces fluffed up, not matted. Distribute

these pieces over the surface of the burner, as shown in Figure 6.

Do not use more than is necessary. Ensure that the main burner ports

remain uncovered by the ember material.

5. Place Lava Rock - Spread lava rock evenly over firebox floor.

6. Install Vermiculite - Place some vermiculite on the firebox floor

around the grate (the entire bag of vermiculite will NOT be used). See

Figure 6. DO NOT PLACE ANY VERMICULITE ON THE BURNER.

Note: This appliance is provided with enough Glowing Embers for several

applications, do not use all that is in a new bag at one time. For best

glowing effect, replace the ember material annually. Replacement Glowing

Embers are available (order Catalog Number 88L53).

INSTALLATION STEPS:

WARNING

• DO NOT attempt to install the logs until the appli-

ance installation has been completed, the gas line

connected and tested for leaks and the initial burner

operation has been checked out.

The size and position of the log set was engineered

to give the appliance a safe, reliable and attractive

flame pattern. Any attempt to use a different log

set in the fireplace will void the warranty and will

result in incomplete combustion, sooting, and poor

flame quality.

Logs get very hot and will remain hot up to one

hour after gas supply is turned off. Handle only when

logs are cool. Turn off all electricity to the appliance

before you install grate, volcanic stone, vermiculite,

embers and logs.

This appliance is not designed to burn wood. Any

attempt to do so could cause irreparable damage to

the appliance and prove hazardous to your safety.

If logs are not installed according to the log

installation instructions, flame impingement and

improper combustion could occur and result in soot

and/or excessive production of carbon monoxide

(CO), a colorless, odorless, toxic gas.

REFERENCE

Firebox Accessories / Parts

Cat. No.

Model No.

Description

88L53

FGE

Bag of Glowing Embers

80L42

FDVS

Bag of Decorative Volcanic Stone

Glowing Embers

Figure 6

Figure 5

Advertising