Linksys Ethernet SGE2010 - Manual (Page 26)

SGE2010/SGE2010P Administration Guide 23
System Configuration
Using the Console
SSL Generate Certificate
Use the SSL Certificate Generation screen to view, edit, and execute device-generated
certificates.
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration.
2. From the System Configuration menu, select 4. Security Settings.
3. From the Security Settings Menu, select 1. SSL Generate Certificate.
To edit and execute a certificate:
1. Select Edit, and then make your changes. Press the Tab key to move the cursor from field to
field.
2. Press the Esc key to move the cursor to the Action list.
3. Select Execute to generate the certificate with the new parameters.
4. When the Operation complete message appears, press the Esc key to move the cursor to the
Action list.
The following fields are specified:
Public Key Algorithm Specifies the SSL type
Public Key Length Specifies the SSL RSA key length. (Range: 512 to 2048)
Common Name (FQCN) IP address of the Ethernet switch
Department Name Specifies the department name. (Range: 1 to 32 characters)
Organization Name Specifies the organization name. (Range: 1 to 32
characters)
Locality or City Name Specifies the location or city name. (Range: 1 to 32
characters)
State or Province Name Specifies the state or province name. (Range: 1 to 32
characters)