Linksys Ethernet SGE2010 - Manual (Page 62)

SGE2010/SGE2010P Administration Guide 59
E
Specifications
Model • SGE2010 48-port 10/100/1000 Ethernet Switch
• SGE2010P 48-port 10/100/1000 Ethernet Switch with PoE
• IEEE 802.3af PoE on delivered over any of the 48 10/100 ports
• Power budget allows for max power of 15.4W to an Ethernet port, with
360W available to all ports on regular AC, and 280W available on
redundant power supply
Ports 48 RJ-45 connectors for 10BASE-T/100BASE-TX/1000Base-T with 4 Gigabit combo
ports shared between mini-GBIC ports
Console port
Auto MDI/MDI-X
Autonegotiate/Manual setting
RPS port for connecting to Redundant Power Supply unit
Cabling Type UTP CAT 5 or better for 10BASE-T/100BASE-TX, UTP CAT 5e or better for
1000BASE-T
Switching Capacity 96 Gig non-blocking
Forwarding Capacity 71.4M packets per second (64-byte packets)
LEDs Power, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 - 8
Stack Operation • Up to 192 ports in a stack
• Hot Insertion and removal
• Ring and Chain stacking options
• Master and Backup master for resilient stack control
• Auto-numbering or manual configuration of units in stack
Buttons Reset Button
Layer 2 options 8K
256 active VLANs (4096 range)
Port-based and 802.1Q Tag-based VLANs
Protocol-based VLAN
Management VLAN
Multicast TV VLAN
Private VLAN Edge (PVE)
GVRP
Head of line blocking prevention
Layer 3 options Static Routing
CIDR (Classless Interdomain Routing)
60 Static Routes
IPv4 and IPv6
Forwarding in silicon - Wirespeed forwarding of layer 3 traffic