Linksys Ethernet SGE2010 - Manual (Page 33)

SGE2010/SGE2010P Administration Guide 30
System Configuration
Using the Console
3. Select Save to save your settings
4. When the Operation complete message appears, press the Esc key to move the cursor to the
Action list.
5. When you are finished working on this screen, select Quit.
IPv6 Address Settings
You can use the IPv6 Address - Configuration screen to edit the IPv6 address settings.
To open this screen:
1. From the Switch Main Menu, select 1. System Configuration.
2. From the System Configuration Menu, select 6. IP Configuration.
3. From the IP Configuration menu, select 2. IPv6 Address Configuration.
4. From the IPv6 Address Configuration menu, select 2. IPv6 Address Settings.
To edit the IPv6 address settings:
1. Select Edit., and then make the changes. Press the Tab key to move the cursor from one
field to the next.
NOTE: To enable or disable the DHCP client, move the cursor to the field, and then press the
Space Bar to toggle between ENABLE and DISABLE.
2. Press the Esc key to move the cursor to the Action list.
3. Select Save to save your settings
4. When the Operation complete message appears, press the Esc key to move the cursor to the
Action list.