Linksys Ethernet SGE2010 - Manual (Page 9)

SGE2010/SGE2010P Administration Guide 6
Placement Options
Connecting Devices to the SGE2010/SGE2010P
CAUTION: Keep enough ventilation space for the Ethernet switch so it does not exceed the
environmental restrictions mentioned in the specifications.
Rack-Mount Placement
To mount the Ethernet switch in any standard-sized, 19-inch wide, (each Ethernet switch
requires 1RU of space in the rack), follow these instructions:
1. Remove the four front screws on one side of the Ethernet switch. Retain the screws for re-
installation.
2. Place one of the supplied spacers on the side of the Ethernet switch so the four holes align
to the screw holes.
3. Place a rack mount bracket next to the spacer and reinstall the four screws (removed in step
1).
4. Repeat steps 2 through 3 for the other side of the Ethernet switch.
5. Attach the Ethernet switch to the rack using the supplied screws.