Lennox Hearth DIRECT-VENT SYMMETRY SERIES SYM-35N - Manual (Page 14)

14
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
SYM-35 LOG PLACEMENT
Figure 11
Log
Number Description
1 Rear Log
2 Bottom Left Log
3 Bottom Right Log
4 Top Right Log
5 Front Log (3)
Catalog Number for the entire
log set: H6953
Step 1
Step 2
Step 3
Step 4
Align the two holes on the bottom of log (1) over
the two tabs at the back of the burner
Placement tabs
for log (2)
1
Placement pin for one of three front logs (5) in Step 3.
Spread Glowing Embers
(Rockwool) As Shown
Placement tabs
for log (3)
1
3
4
Align the slots at the bottom of logs (2) and
(3) over the log tabs on the left and right side
of the burner
2 3
Place log (4) on log (3) with the front
of the log touching the front of log (5),
resting on the burner top.
5
4
5
Position log (5) on burner
as shown. (See Step 4 On
SYM-40)
5
Tab for placing log (5)
as shown in Step 4.
Place log (5) over the
pin on log (2) as shown.
Swing the front of the log
clockwise, to the dimple
on the top of the burner.
5 2
Position log (5)
on tab as shown.