Lennox Hearth DIRECT-VENT SYMMETRY SERIES SYM-35N - Manual (Page 16)

16
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
SYM-45 LOG PLACEMENT
Figure 13
Log
Number Description
1 Rear Log
2 Bottom Left Log
3 Bottom Right Log
4 Top Left Log
5 Top Left Cross Log
6 Top Right Cross Log
7 Top Right Log
8 Front Log
Catalog Number for the entire
log set: H6959
Step 1
Step 2
Step 3
Step 4
Align holes at the bottom
of log (4) over the pins
on log (2).
4
1
8
3
5 7
2
6
Align the two holes on the bottom of log (1) over
the two log tabs at the back of the burner
Align the slots at the bottom of logs (2) and (3)
over the log tabs on the left and right side of
the burner as shown.
2
1
3
Place log (7) over the pin at the top of log (6) and
rest the tip of the log on the dimple of the burner top.
7
8
4
Pin on log (4) used
with log (5) in Step 3.
Indentention used with
log (7) in Step 4.
Place log (8) on
burner as shown.
5
Place log (5) over the pin on log (4)
and rear log as shown.
(See Step 4 On SYM-40)
First place log (6) over the pin on log (3), then
rest the back half of log (6) over the pin on log (1)
6
Pin on log (1) used
with log (6) in Step 3.