LevelOne WBR-1400TX - Manual (Page 105)

LevelOne Wireless Broadband Router User Guide
ATLn Speaker volume control. n=0-7
ATMn Speaker control
M0 Speaker always off
M1 Speaker on until carrier is detected
M2 Speaker always on
M3 Speaker on after last digit dialed, off at carrier detect
ATNn Ring volume control, n=0 disables ring function. (n=0..7)
ATO Return to on-line state
ATP Pulse dial
ATQn Result code displayed
Q0 Modem returns result code
Q1 Modem does not return result code
Q2 Return result code but quiet in answer mode (will not show in AT&Vn)
ATS0=n Number of rings required before modem answers. n=0 disables auto-answer.
ATSr.b=n Set bit b of S-register r to n. (n=0 or 1)
ATSr.b? Inquiry bit b of S-register r
ATSr=n Set S-register r to value n, where n is a decimal number between 0-255
ATSr? Display value stored in S-register r
ATT Tone dial
ATVn Verbal/Numeric result codes
V0 Display result codes in numeric form
V1 Display result codes in verbose form
ATXn Result code options. (n=0..7)
ATZn Reset the modem and set power-on profile. (n=0..4)
Zn Reset modem and load user profile n (n=0..3)
Z4 Reset modem and load factory settings
AT$ Help, Basic command summary
AT&$ Help, Extended AT& command summary
AT*$ Help, Extended AT* command summary
102