LevelOne WBR-1400TX - Manual (Page 36)

PC Configuration
Figure 21: TCP/IP Properties (Win 2000)
5. Ensure your TCP/IP settings are correct, as described below.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows setting. Using this is recommended. By default, the LevelOne Wireless Broadband
Router will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the LevelOne Wireless Broadband
Router.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the
following changes.
• Enter the LevelOne Wireless Broadband Router 's IP address in the Default gateway field
and click OK. (Your LAN administrator can advise you of the IP Address they assigned to
the LevelOne Wireless Broadband Router.)
• If the DNS Server fields are empty, select Use the following DNS server addresses, and
enter the DNS address or addresses provided by your ISP, then click OK.
33