LevelOne WBR-1400TX - Manual (Page 77)

LevelOne Wireless Broadband Router User Guide
Dial-in Users Screen
This screen is reached via the Dial-in Users button on the Dial-in screen.
• All defined users are listed. If you have not defined any users, only the "guest" user will be
listed.
• When a user is selected, their data is displayed in the "User Properties" area, where it can
be modified if desired.
Figure 41: Dial-in Users Screen
Data - Dial-in Users Screen
User List
User List
• This lists all users who currently exist.
• The "guest" user is pre-defined, and will always be in the list.
• Select the user you wish to change. Data for the selected user will be
shown in the "User Properties" fields.
User Properties
User Name
• Enter the name for the new user here. Spaces, punctuation, and
special characters must NOT be used in the name.
• User names are case insensitive (case is ignored), so you can not
have 2 names which differ only by case.
• When a remote user establishes a Dial-in connection, they will be
prompted for the this User name and the password (below).
Password The password for this user. The user must provide this password when
they establish a Dial-in connection.
Verify Re-enter the password for this user, to ensure it is correct.
Enable dial-in
access If checked, Dial-in access is available for this user.
If not checked, a Dial-in connection will not be allowed.
74