LevelOne WBR-1400TX - Manual (Page 13)

10
2
Chapter 2
Installation
This Chapter covers the physical installation of the LevelOne Wireless
Broadband Router.
Requirements
• Network cable - standard 10/100BaseT network (UTP) cable with RJ45 connectors.
• TCP/IP protocol must be installed on all PCs.
• For Internet Access, an Internet Access account with an ISP, and either of:
• A DSL or Cable modem (for WAN port usage)
• An analog modem or ISDN TA (for Serial port usage -- LevelOne WBR-1100TX
only)
• To use the Wireless Access Point, all Wireless devices must be compliant with the
IEEE802.11b specifications.
• For shared access to the attached printer, the following clients are supported:
• Windows 95/98/ME
• Windows NT 4.0, 2000 or XP
• Apple Macintosh
• Unix (LPD printing)
Procedure - WBR-1100TX
Figure 4: Installation – WBR-1100TX