LevelOne WBR-1400TX - Manual (Page 48)

PC Configuration
Note:
If you have made a host file entry, you can use the name from the
host file instead of the IP Address.
Remote Queue Ln
Where n is the Logical Printer number
(L1, L2, L3). Logical Printers can be
configured on the LevelOne Wireless
Broadband Router 's Options- Printer
Port screen. L1
4. Save this data, and exit the Printer Configuration. Configuration is now completed, and the
printer is now available for use.
Other Unix Systems
Internet Access
• Ensure the "Gateway" field for your network card is set to the IP Address of the LevelOne
Wireless Broadband Router.
• Ensure your DNS (Name Server) settings are correct.
Printing Setup
To use LPD printing to the LevelOne Wireless Broadband Router 's printer, install an LPD
printer using the standard procedure for your system.
• Use the LevelOne Wireless Broadband Router 's IP Address as the location of the remote
host
• Use L1, L2, or L3 for the name of the printer on the remote host.
On the LevelOne Wireless Broadband Router, the logical printers (L1, L2, and L3) can be
configured on the Advanced - Printer Port screen. . See Printer Port in Chapter 8 - Advanced
Configuration for details.
45