Lowrance electronic LMS-334c iGPS - Manual (Page 139)

131
Edit Route menu (left). Edit Route Waypoints menu (right)
with Add From Map command selected.
3. Use the Zoom keys and arrow keys to move the map and cursor until
the cursor is centered on the spot where you want your route to begin.
If you are starting at your current position or the current cursor posi-
tion, you are already at the starting spot.
4. Press ENT to set the first waypoint. In the example below, we started
the route at the intersection of 11th Street and 145th E. Ave.
Route creation sequence: Fig. 1. Set route waypoint (1) at 11th St. &
145th Ave. Fig. 2. Zoom in; move cursor north to set point (2) at 145th &
Admiral. Fig. 3. With point (2) set, move cursor east to mark interstate
on-ramp with waypoint (3). In figures 2 and 3, notice the rubber band
line extending from the previously set waypoint to the cursor. This
line will become the course for the route.
1. 2. 3.