Lowrance electronic LMS-334c iGPS - Manual (Page 173)

165
Overlay Data Shown, with Water Temp selected (left). Press ENT to ac-
cess R
EMOVE
option (center). Press ENT again to remove item and return
to Overlay Data Shown (right).
To move Overlay Data:
You may find it useful to rearrange data on your display window.
1. From one of the Map Pages, press MENU |
↓ to
O VERLAY D ATA
| ENT .
2. You'll see a list of the overlay data currently displayed. Select the
item you want to move and press
ENT |
→ to
M
OVE
| ENT .
3. The data begins to flash on your screen. Use
↑ ↓ , ← → to move the
data to a new location on the screen.
4. When the data is in the desired position, press EXIT | EXIT .
NOTE:
The Customize command and the Overlay Data command both use
the same information categories. The difference between the two
options is the Customize command changes only the data boxes on
a screen, while the Overlay Data command changes only the infor-
mation displayed directly on the screen.
Closing Speed in the overlay data shown menu (left). The size of the
Closing Speed display has been changed from small to enormous.