Lowrance electronic LMS-334c iGPS - Manual (Page 141)

133
3. Press
↑ ↓ to change the first character, then press → to move the
cursor to the next character and repeat until the name is correct and
press
ENT . Return to the main page display pressing EXIT repeatedly.
Edit Route Waypoints
You can edit the route by adding and removing waypoints.
1. From the N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Press
↓ to route name|
ENT |
↓ to
R OUTE W AYPOINTS L IST
. Use
↓ ↑ to se-
lect a waypoint and press ENT .
Edit Route Waypoints menu.
3. Use
↓ ↑ to select a command from the Edit Route Waypoints menu
and press ENT . Add From Map lets you insert a waypoint in the route
by clicking on a map location with the cursor. Add Waypoint calls up
the Waypoint List so you can insert a waypoint from the list. Remove
Waypoint will delete the waypoint from the route. View Waypoint will
show you where the selected waypoint is on the map.
NOTE:
When adding waypoints to a route, the inserted waypoints will ap-
pear in the route in front of the waypoint you have selected. To in-
sert waypoints at the end of the route, make sure to select
E ND OF
ROUTE
before adding them.
Navigate a Route
1. From the N
AVIGATION
P
AGE
, press MENU | ENT or from the M
AP
P
AGE
,
press MENU | MENU |
↓ to
R
OUTE
P
LANNING
| ENT .