Lowrance electronic LMS-334c iGPS - Manual (Page 192)

184
Waypoint Information screens with the Go To Waypoint command se-
lected (left) and the Find on Map command selected (right).
To return to the previous page, press EXIT repeatedly.
5. If you're looking by name, there are two options: A. You can spell out
the name in the top selection box. Press
↑ ↓ to change the first letter,
then press
→ to move the cursor to the next letter and repeat until the
name is correct, then press ENT | ENT . B. Or you can jump down to the
lower selection list by pressing ENT , then press
↓ ↑ to select a waypoint
from the list, then press ENT . The waypoint information screen appears.
Find By Name menu (left). Waypoint Information screen (center). The
found waypoint is highlighted by the cursor on the Map Page (right).
A. To navigate to the waypoint, press ENT . The Go To Waypoint
command is already highlighted. The unit will show navigation in-
formation to the waypoint.
B. To find the waypoint, press
↓ to
F
IND
O
N
M
AP
| ENT . The Map Page
appears with the cursor highlighting the found waypoint.