Lexmark Z82 - Manual (Page 93)

Troubleshooting 9-9
Chapter
9
9-9
Problem Cause & Solution
● Align the print cartridge.
● Adjust the Print Quality to Normal.
Characters print askew
● Check to see if the print cartridge ink is low or
empty.
● Remove and reinstall one of the print cartridges.
See 'Replacing Print Cartridges' on page 9-2 for
more information.
● Clean the printheads.
Characters print with
White lines
● This printer is not selected as the default. Check
the default printer.
● M ake sure you are using the correct cable. Use
an IEEE 1284-compliant parallel cable or a USB
cable.
Incorrect character print
P
rint Quality Problems
Chapter 9
● Make sure the Print Quality setting is set to
Normal. See Print Quality on page 5-9 for more
information.
● Check to see if the print cartridge ink is low or
empty.
● If you are printing on an uneven print surface,
change the paper type setting.
● If there is a recommended print size for the paper,
load the proper paper.
● Clean the printheads.
Print is too light or
blurred