Lenoxx Electronics SL-6703 - Manual (Page 15)

IB-SL6703(TA)-PRADO-E-091802
RECORDING ON A TAPE
Press the STOP/EJECT button (DECK
B) to open the tape compartment and
insert a blank tape. Select the program
source (MW, FM, CD, or microphone)
you want to record.
2 3
3
STOP/EJECT
To record from the CD player, set the FUNCTION switch to
CD position, insert a CD and follow the steps to play a CD
(see page 5).
To record from a radio, set the FUNCTION switch to RADIO
position, and tune into the station you want (see page 9).
To record from the microphone, set the FUNCTION switch to
the TAPE position, and plug the microphone (not included)
into the MIC JACK. Speak into the microphone.
4
RECORD
To hear what you recorded, set the FUNCTION switch to
TAPE position, then press REWIND and PLAY.
5
REWIND PLAY
14
To record from the DECK A, set the FUNCTION switch to the
TAPE position, and follow the steps to play a TAPE (see
page 11).
OK NO
2
1
Press the RECORD button to start recording. (The PLAY
button is depressed automatically.)
1
4
MICROPHONE JACK
Connect the supplied AC power cord (see page 3).
Press the POWER switch, the VFD
display will turn on.
5