Lenoxx Electronics SL-6703 - Manual (Page 19)

IB-SL6703(TA)-PRADO-E-091802
PRECAUTIONS
On Safety
•
As the laser beam used in the CD
player section may be harmful to the
eyes, do not attempt to disassemble
the cabinet. Refer servicing to
qualified personnel only.
•
Should any solid object or liquid fall
into the set, unplug the player, and
have it checked by qualified personnel
before operating it any further.
18
On Operation
•
If the set is brought directly from a
cold to a warm location, or is placed
in a very damp room, moisture may
condense on the lens inside the CD
player section. Should this occur, the
set will not operate properly. In
this case, remove the CD and wait
about an hour for the moisture to
evaporate. If the set has not been
used for a long time, set it in the
playback mode to warm it up for a few
minutes before inserting a cassette.
•
This set is designed to be played on
a stable no vibration position. If you
bump the set during CD play, the music
will stop or skip for a few seconds.
This is normal for this type of player.
On Placement
•
Do not leave the set in a location
near a heat source, or in a place
subject to direct sunlight, excessive
dust or mechanical shock.
•
Do not place the set on an inclined
or unstable place.
•
Do not place anything within 1 inch of
the back of the cabinet. The
ventilation holes must not be covered
for the set to operate properly and
prolong the life of its components.
•
If the set is left in a car parked in the
sun, be sure to choose a location in
the car where the set will not be
subjected to the direct rays of the
sun.
•
Since a strong magnet is used for the
speakers, keep personal credit cards
using magnetic coding or springwound
watches away from the speakers to
prevent possible damage from the
magnets.