Lenoxx Electronics SL-6703 - Manual (Page 4)

IB-SL6703(TA)-PRADO-E-091802
CONNECTING THE AC POWER CORD
Insert one end of the supplied AC power cord into the socket located at the back
of the set, and the other end to the wall outlet.
3
AC SOCKET
To a wall outlet
ATTACHING THE SPEAKERS
TIP
If the plug of the AC power
cord does not match your
outlet, do not force it.
Reverse it and try again.
The plugs are polarized
and only fit one way into
the wall outlet and back of
the set.
1.Bring one of the speaker
to the left side of the set.
2.Carefully unwind one
piece of the speaker wire
cord (included), and plug
one red end into the left
plug of Speaker Jack L
(marked “L”), and the black
end into the left Grounding
Jack (marked “G”).
3.Repeat above steps 1 to 2
for the right side speaker.
CONNECTING CD/AUX INPUT
Simply connect the cable’s appropriate end (cable is not included) usually RCA
JACKS to the CD/AUX INPUT of the set and the mini plug to the AUX OUT jack
on your CD player.
YOUR CD PLAYER
TO CD/AUX
INPUT JACKS
TO AUX OUT JACK OPTIONAL CABLE (3.5mm)
TO RCA JACKS