Lexmark 5770 - Manual (Page 70)

Troubleshooting
64
Troubleshooting
Removing the exit tray
If you need to repack the printer in its original box, you
must remove the paper exit tray.
1
Remove the paper support.
2
Pull the paper exit tray as far out of the printer as
possible.
3
Turn the printer over so you can see the bottom of
the printer.
4
Locate the hooks holding the paper exit tray in
place.
5
Using a ball-point pen, gently pry the hooks
upward until you can pull the exit tray past them.
6
Pull the paper exit tray all the way out of the
printer.
Hook
Hooks
5700.book : trouble.fm Page 64 Thursday, July 16, 1998 3:49 PM