Land Pride RCP2660 User Manual
Page 12
10
Introduction
RCP2660, RCPM2660, RCP3060 and RCPM3060 Parallel Arm Rotary Cutter 316-111M
1/11/13
Terminology
“Right” or “Left” as used in this manual is determined by
facing the direction the machine will operate while in use
unless otherwise stated.
Definitions
Owner Assistance
The Online Warranty Registration or Warranty
Registration card should be completed by the dealer at
the time of purchase. This information is necessary to
provide you with quality customer service.
The parts on your Parallel Arm Rotary Cutter have been
specially designed by Land Pride and should only be
replaced with genuine Land Pride parts. Contact a Land
Pride dealer if customer service or repair parts are
required. Your Land Pride dealer has trained personnel,
repair parts, and equipment needed to service the
implement.
Serial Number
Model No. _____________Serial No. _______________
For quick reference and prompt service, record model
number and serial number in the spaces provided above
and again on warranty page 59. Always provide model
and serial number when ordering parts and in all
correspondences with your Land Pride dealer. Refer to
Figure 1 for location of your serial number plate.
Serial Number Plate Location
Figure 1
IMPORTANT: A special point of information related
to the following topic. Land Pride’s intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.
30033
Introduction
Land Pride welcomes you to the growing family of new
product owners.
This Rotary Cutter has been designed with care and built
by skilled workers using quality materials. Proper
assembly, maintenance, and safe operating practices will
help you get years of satisfactory use from this machine.
Application
The Hydraulic Parallel Arm Rotary Cutters are designed
and built by Land Pride to provide excellent cutting
performance on ditch banks and other sloping areas
adjacent to right-of-ways, lakes, ponds, and streams.
They are designed to work equally as well in and around
areas of restricted access such as over or under fences,
guardrails, low overhanging branches, tree limbs, and
hedges. These units perform extremely well in tall grass
cutting applications and will easily cut through standing
brush up to two inches in diameter. An optional cutter
head equipped with two forward and one rear gauge
wheel is also available for customers who want to
maintain a constant cutting height with minimal control
lever manipulation.
The RCP2660 and RCPM2660 cutters are adapted for
Category 2 or 3 three-point hitch mounting on 75 hp. to
150 hp. tractors weighing 8,000 lbs. or more.
The RCP3060 and RCPM3060 cutters are adapted for
Category 2 or 3 three-point hitch mounting on 95 hp. to
175 hp. tractors weighing 12,000 lbs. or more.
The Hydraulic drive requires 540 rpm input PTO speed
for RCP2660 & RCP3060 models and 1000 rpm for
RCPM2660 & RCPM3060 models. Depending upon
hydraulic configuration, one, two, or four duplex hydraulic
outlets are required on the tractor to operate the cutter’s
parallel arms and deck angle.
See “Specifications & Capacities” on page 53
and “Features & Benefits” on page 55 for additional
information and performance enhancing options.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge from our website at
www.landpride.com.