Land Pride RCP2660 - Manual (Page 37)

35
Section 5: Optional Equipment
1/11/13 RCP2660, RCPM2660, RCP3060 and RCPM3060 Parallel Arm Rotary Cutter 316-111M
Table of Contents
Bolt-on Weight Hangers
Refer to Figure 5-1:
A right-hand overturning torque load is present on the
tractor when parallel arms are fully extended. Auxiliary
weights should be added to the left rear tractor wheel to
help offset this overturning load. In addition, 100 lb.
suitcase type weights can be added to Land Pride’s
weight hanger. The weight hanger is attached to the left
side of the hydraulic reservoir. See “Weight Hanger
Assembly” on page 18 for attachment instructions.
IMPORTANT: Adding weights to the reservoir can
lighten the tractor’s front end. Front tractor weights
and/or ballast to tires may be required to offset
cutter and auxiliary weights. Consult your tractor’s
manual to determine if additional ballast is needed.
IMPORTANT: Suitcase type weights illustrated with
weight hangers are provided by the customer. Make
sure the suitcase weights are the same brand name
and match the weight hanger. Not all suitcase
weights of the same brand name match the
weight hanger designed for that brand.
Only For the IH Suitcase Weight illustrated
Bolt-on Weight Hanger Part No. 316-232A
Only For the Case/IH Suitcase Weight illustrated
Bolt-on Weight Hanger Part No. 316-233A
Only For the New Holland Suitcase Weight illustrated
Bolt-on Weight Hanger Part No. 316-234A
30027
International Harvest Suitcase Weight
Case/IH Suitcase Weight
New Holland Suitcase Weight
Their are five bolt-on weight hangers for attaching to the
left side of the hydraulic reservoir. Each weight hanger is
designed specifically by Land Pride to receive a specific
suitcase weight. Make sure your suitcase weight
matches the weight hanger. The different weight hangers
are easily identified by the company’s brand name initials
cut into the side plates. They can be purchased from your
nearest Land Pride dealer by the part number listed
under each illustration hanger below.
Only For the John Deere Suitcase Weight illustrated
Bolt-on Weight Hanger Part No. 316-230A
Only For the Case Suitcase Weight illustrated
Bolt-on Weight Hanger Part No. 316-231A
John Deere Suitcase Weight
Case Suitcase Weight
Bolt-on Weight Hangers
Figure 5-1