Figure 11, Figure 10 – Life Fitness CM3 User Manual
Page 10
Advertising
10
0
1
2
3
4
5
6
1/2
1/2
1/2
1/2
1/2
1/2
FIGURE 11
STEP 11:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to
the bracket on the SEAT FRAME using one 3/8 X 1-3/4” BOLT (9) and one 3/8” LOCK NUT (8) as shown in FIGURE 11 . Make
sure the CABLE is in the grooves of all the pulleys.
3/8 X 1-3/4” 9
5
4
8
SEAT FRAME
FIGURE 10
STEP 10:
12
SEAT FRAME
• SECURELY attach the BRACKET (from LP5 LEG PRESS) to the SEAT FRAME using two 3/8” X 4-3/4” BOLTS (12), two 3/8”
WASHERS (7), and two 3/8” LOCK NUTS (8). See FIGURE 10.
3/8” L0CK NUT
7
8
BRACKET
3/8 X 4-3/4”
Advertising