Life Fitness CM3 - Manual (Page 11)

FIGURE 12
STEP 12:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5) to
the SEAT FRAME using one 3/8 X 4-3/4” BOLT (12), two STEP SPACERS 1-19/32 (14), and one 3/8” LOCK NUT (8) as shown in
FIGURE 12. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 4-3/4” 12
5
4
8
14
MAIN ARM
FIGURE 13
STEP 13:
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5)
to the MAIN ARM using one 3/8 X 2-3/4” BOLT (10), two STEP SPACERS 19/32”(13) and one 3/8” LOCK NUT (8) as shown in
FIGURE 13. Make sure the CABLE is in the grooves of all the pulleys.
3/8 X 2-3/4” 10
5
4
8
13
3/8” LOCK NUT
11
SEAT FRAME