Life Fitness CM3 - Manual (Page 8)

8
FIGURE 6
STEP 6:
• SECURELY assemble the LEG PRESS ADAPTOR (1) to the CM3 Gym System using two 3/8 X 4” BOLTS (11), five 3/8”
WASHERS (7), one previously removed 3/8” LOCK NUT and one 3/8” LOCK NUT (8) as shown in FIGURE 6.
1
8
7
11 3/8 X 4”
FIGURE 7
STEP 7:
1
8
• Carefully route the LEG PRESS CABLE (4) around one 3-1/2” PULLEY (5) and SECURELY assemble the 3-1/2” PULLEY (5)
to the LEG PRESS ADAPTOR (1) using one 3/8 X 1-3/4” BOLT (9) and one 3/8” LOCK NUT (8). See FIGURE 7.
4
9 3/8 X 1-3/4”
5