Lennox Hearth ADAGIO-EN - Manual (Page 16)

16
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Forced Air Kit
(for millivolt models only)
If the main power supply was wired to the
fireplace J-box/receptacle and wired to a wall
switch or wall mount rheostat at the time of
installation, an optional air-circulating blower
kit can be installed.
***Note: These kits can only be installed at the time of the
fireplace installation.
(ref. Form # 750,238M)
ACCESSORY COMPONENTS
Remote Control Kit, Standard
Cat. No. Model No. Description
H0249 RCL Remote Control System
(Standard)
Remote Control Kit, Deluxe
Cat. No. Model No. Description
H0251 RCL-STAT Remote Control System
(Deluxe)
Digital Wall Thermostat ***
The wall thermostat kit provides temperature control
for optimum comfort.
Wall Thermostat, Millivolt ***
Cat. No. Model No. Description
H4635 DWTK Wall Thermostat Kit,
White
Standard Remote Control System
The Model RCL (Standard) Remote Control System,
features a simplistic OFF/ON control function for the
fireplace. This model includes a hand-held transmitter,
a remote receiver with wall-mount cover plate and
all hardware required to install the unit. The remote
receiver can be wall or hearth mounted.
The transmitter has ON and OFF functions that are
activated by pressing either button on the face of
the transmitter. When a button on the transmitter
is pressed, a signal light illuminates briefly to verify
that a signal has been sent.
The Model RCL is designed to operate with all mil-
livolt ignition systems, as well as electronic ignition
systems. It may be installed with use for either
natural gas or propane gas appliances. The RCL
offers ease of installation and allows you to execute
on-off commands to the fireplace effortlessly with
one simple motion.
The Model RCL comes complete with detailed operat-
ing instructions.
Deluxe Remote Control System
The Model RCL-T (Deluxe) Remote Control System
has all of the features of the standard system along
with an added easy to read LCD screen which presents
access to many enhancements, including; battery
power level indicator, timer, mode of operation,
thermostatic display including room temperature in
either metric of English units, flame indicator and
clock. Fully programmable, the Model RCL-T allows
for virtual command over nearly all operational and
temperature variables, using the hand held remote
control transmitter.
The Model RCL-T (Deluxe) remote control system
is installed in the same manner as the standard
system, may be operated with electronic and mil-
livolt systems with either natural gas or propane gas.
The RCL-T comes complete with detailed operating
instructions.
Product Reference Information
Cat.
No.
Model Ship.
Weight
Ship.
Volumn
H5766 ADAGIO-MN 70 lb. 10.25 cu. ft.
H5767 ADAGIO-MP 70 lb. 10.25 cu. ft.
H5768 ADAGIO-EN 70 lb. 10.25 cu. ft.
(ref. Form # 750,127M)
(ref. Form # 750,129M)
Flame Modulating Remote Control
Flame Modulating Remote Controls were developed
to provide a safe, reliable and user-friendly remote
control system for appliances equipped with a Millivolt
Gas Valve. A detailed set of instructions are included
with each remote.
(ref. Form # 750,130M)
Flame Modulating Remote Control Kits
Cat. No. Model No. Description
H0301 RCL-MN Natural Gas
H0302 RCL-ML Propane Gas
Forced Air Blower Kit, Single Speed
Cat. No. Model No. Description
H6161 ADAGIO-BLWR Blower Kit
Variable Speed Wall Switch***
Provides variable speed control if optional
blower kit is purchased.
Variable Speed Wall Switch ***
Cat. No. Model No. Description
045571H VSWS Rocker Switch Kit