Chapter 2. basic functions, Turning the phone on and off, Correcting dialing mistakes – LG -TM520 User Manual

Page 6

Advertising
background image

In use
A call is in progress.
No icon indicates the phone is in standby mode.

Digital indicator
Digital service is available.

Analog indicator
Analog service is available

Indicates that a text message or voice mail has been received

Roaming
The phone is outside of its home service area.

Charge level
Indicates battery charge level.

Chapter 2. Basic Functions

Turning the Phone On and Off

Turning the Phone On
1. Install a charged battery pack or connect the phone to an external power source such as the

cigarette lighter adapter or car kit.

2. Press [END/PWR] for a few seconds until the red light on the top of the phone flashes.

l Fully extend the antenna for the best performance.


<Note> Like any other radio device, avoid any unnecessary contact with the antenna while your
phone is on.

Turning the Phone Off
1. Press and hold until display screen will be turned off, and then release the key.
2. Protect the antenna by pushing it back into the phone, if extended.


Making a Call
When you make a call, follow these simple steps:
1. Make sure the phone is turned on.

l If not, press [END/PWR].

2. Enter the phone number with area code, if needed.
3. Press [SEND].

l If the phone is locked, enter the lock code.
l “Call Failed” indicates that the call di d not go through.

4. Press [END/PWR] to disconnect the call.

Correcting Dialing Mistakes

If you make mistakes in dialing a number, press [CLR] key once to erase the last entered digit or
hold down [CLR] for at least two second to delete all digits, or simply press soft key 2 [BACK] to
exit dialing state.

Advertising