Lenoxx Electronics MP-456 - Manual (Page 11)

IB-MP456-WC-E-030206
NOTE: If you are using Windows 98SE, you must first install Windows 98SE driver, see
page 8.
10
2-3. Connecting the Audio Player and Your Computer
3 When the cable is properly connected and the computer successfully recognizes the
MP-456, the player will display “READY” on the LCD display.
4 You are now ready to copy music files or data to the player. It will display “WRITING”
when downloading (when you copy music files from computer to player), and displays
“READING” when uploading (when you copy files from player to computer).
Both PC or Mac users must use the USB cable (included) to connect the player and
computer before you can download or upload music files to the computer.
1 Connect the smaller plug of the USB cable to the mini-USB port on the player as shown.
Plug only fits one way, if the plug does not match the mini-USB port, don’t force it,
just reverse it and try again.
Fig. 2-3-1 Connecting the Audio Player and Your Computer
Connecting USB
with computer
DOWNLOADING UPLOADING
2 Connect the larger plug of
the USB cable to any available
USB port on your computer.
First time connection of the
player to the computer with
Windows Me, 2000, or XP, the
computer will detect “New
Hardware” and software
drivers will be installed by
Windows automatically.
IB-MP456-WC-E-030206.pmd 10/16/2006, 11:25 AM 11