Lenoxx Electronics MP-456 - Manual (Page 21)

IB-MP456-WC-E-030206 20
3-10. Using the FM Radio (87.5-108MHz)
NOTE: The Earphone’s wire is also an FM Antenna. Adjusting the length and the
position of the earphone’s wire can improve the FM reception. Touching the earphone’s
wire during FM play may affect reception of weak stations.
1. Press and hold the MODE switch to enter the menu, turn the MODE switch left or right
to select “FM”.
2. Press the MODE switch to enter radio reception.
3. Scan the FM Station.
a. Press the MODE switch to enter the “Scan” menu.
b. Turn the MODE switch left or right to scan manually (0.1MHz/step).
c. Press
button to start automatic scan, it will stop when it finds an available
FM station.
Fig.3-10-1 FM Menu Fig.3-10-2 Listen to the Radio Fig.3-10-3 Scan
4. Store FM station.
a. When you find a station, press the MODE switch until the word “Store” appears on the display.
b. Turn the MODE switch left or right to select the memory position you want to store,
and then press button. The display will show “Stored”, and then it will go back
to reception status.
c. Repeat above steps to store other FM stations.
Fig.3-10-4 Store FM station
Memory
position
Stored
IB-MP456-WC-E-030206.pmd 10/16/2006, 11:25 AM 21