Lenoxx Electronics MP-456 - Manual (Page 9)

IB-MP456-WC-E-030206
1-5. Battery Installation
1 Slide the battery cover off as shown.
2 Insert one AAA battery, note the
polarities of the battery (+ and –).
3 Put the cover back.
Fig. 1-5-1 Inserting the Battery
Battery Safety
ä Do not dispose of any battery in fire.
ä
Do not put the battery in a damp place.
ä Please take out the battery if you don’t use
the player for a long time (over 2 weeks).
ä Battery should be installed by adults for safety.
2- Software Installation
2-1. Basic System Requirements
Intel Pentium II 300 MHz or above
128MB RAM(minimum)
150MB free space in hard drive
USB port
CD-ROM drive
Operating Systems Supported: Windows 98SE or Windows Me or Windows 2000 or Windows
XP or Mac OS X 10.2.6 or above.
NOTE: For Windows Me/2000/XP users, no software installation is needed. The set is
fully plug and play. For older computers running on Windows 98SE, you will need
to install drivers from the supplied disc. For Windows 95 or earlier users, this set
will not work and we recommend you upgrade your operating system and get a
computer with a USB port.
8
Slide to
open
2-2. Installing Software Driver
(For Windows 98SE users only)
and Utilities
For Windows 98SE only, if you have a newer system like Windows XP or Me, go to step 4.
1 Turn on your computer and insert the Driver Setup disc to the CD-ROM drive.
2 The computer screen will display the DURABRAND welcome page.
3 Select “Install”, click the “Windows 98SE driver”.
IB-MP456-WC-E-030206.pmd 10/16/2006, 11:24 AM 9