Lenoxx Electronics MP-456 - Manual (Page 18)

IB-MP456-WC-E-030206
Fig. 3-6-1 Using the External SD/MMC Memory Card
3-6. Using an External SD/MMC Memory Card (Optional - not included)
1. Turn off the player. Open the back cover, see diagram below.
2. Confirm the card is SD/MMC type and insert the card correctly as indicated in the
diagram, then close the battery cover box.
NOTE 1: The external SD/MMC card requires a fully charged or fresh battery to operate,
so please change to a new battery if you can’t power on when you are using
the external SD/MMC card.
3. Turn on the player. It will play the music on the SD/MMC card automatically, the
memory icon will show in the display (card play).
4. If you want to listen to the music on the built-in flash memory, please press and hold
the MODE switch to enter the menu and then turn the MODE switch to the left to
select the FLASH MUSIC, press the MODE switch to confirm. The memory icon
changes to
. Press the PLAY button to start to play the music on the built-in
flash memory.
I ou Love Y
Flash memory in use
Fig. 3-6-2 Selecting the Built-in flash memory
17
NOTE 2: Be sure to turn off the MP3 player before inserting or removing the SD/MMC
card. If your set is on, it may cause some data to be lost or the set to freeze
or become inoperative. If this should happen, please take out the battery for
1 minute, then replace it and restart the MP3 player.
2 1
IB-MP456-WC-E-030206.pmd 10/16/2006, 11:25 AM 18