System features, Aria – LG Aria 20A User Manual

Page 14

Advertising
background image

aria

20 SERIES DIGITAL KEY TELEPHONE SYSTEM USER GUIDE:

aria

20A,

aria

20,

aria

20W

13

Flash

Button

Procedures

While connected to an outside line, press FLASH button.

Range

May disconnect outside line and re-seize dial tone if programmed . It can be used to send a recall to line, when the system is

connected with a PBX or Enhanced Feature Analogue Line.

Placing a CO Call on Hold

Button

Procedures

While on a CO call

Press HOLD/SAVE button.

- Hold Preference for system hold or exclusive hold is set at Installer programming

To retrieve the call,

Lift handset and press flashing outside line button. OR dial 8 # and the CO line

number

Range

Group Call Pick-up

Button

Procedures

Range

You should be in the same pick-up group as ringing phone.

You hear an unattended phone ringing.
Lift handset or press MON button.
Dial 6 6

Conference

Button

Procedures

Range

To establish a conference,

Call desired party. (internal or outside)
Press CONF button. (CONF button is lighting and the called

party is put on exclusive hold.)

Call the next party.
Press CONF button twice. (once if adding additional parties)
Conference is established.

To exit a conference (unsupervised),

Press CONF button in the supervisor station and hang up.

Other parties are still connected.

NB:
At most 3 parties
can be active in
a conference.

Re-entering a conference,

Lift handset or press MON button.
Press CONF button.

To drop an outside party, (not available in aria 16/20W)
(You should be active in the conference.)

Press outside line of party you wish to drop.
Hang up or press MON button.

To terminate the conference,

Hang up or, press CONF button if unsupervised.

On LKD-2N/S, 8D/S,

Conference feature can be accomplished by programming

a flexible key as CONF button (TRANS + 91).

Programming Your Name into Display

Button

Procedures

Press TRANS/PGM button.
Press SPEED button and dial 0 0.
Press SPEED button.
Enter your name. (up to 7 letters using the code in “Storing Dial by name.)
Press HOLD/SAVE button.

Range

You can program your name and people using display phones will see your name instead of your station number.

Available by Software:
16: Above V4.0
20W: Above V3.0)

System Features

Advertising
This manual is related to the following products: