LG LST-3510A - Manual (Page 11)

11
INTRODUCTION
Connection Panel Overview
Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
AC Power Cord
Plug into the power source.
ANT LOOP OUT
RF output to TV’s “Antenna In” jack or other devices.
DIGITAL AUDIO OUT (OPTICAL)
Connect to digital (optical) audio equipment.
DIGITAL AUDIO OUT (COAXIAL)
Connect to digital (coaxial) audio equipment.
VIDEO OUT
Connect to a TV with video inputs.
COMPONENT VIDEO OUT
Connect to a TV with YPbPr inputs.
AUTHORIZED SERVICE ONLY
Is used only for authorized service purposes.
ANT IN
Connect to HDTV signal source; external/internal antenna.
S-VIDEO OUT
Connect to a TV with S-Video inputs.
DVI-HDTV OUT
Connect to a TV with DVI connector.
Variable “volume” AUDIO OUT (Left/Right)
Connect to a TV, amplifier, receiver or stereo system.
You can adjust the volume of this audio out on DVD/HDTV Receiver.
Fixed “volume” AUDIO OUT (Left/Right)
Connect to a TV, amplifier, receiver or stereo system.
You can not adjust the volume of this audio out on DVD/HDTV Receiver.
RGB OUT
Connect to a TV with RGB inputs.