Connections (continued) hd monitor rgb connections – LG LST-3510A User Manual
Page 15
INST
ALLA
TION
15
Connections (Continued)
HD Monitor RGB Connections
11
11
Connect the “Antenna/Cable” to the “ANT IN” jack on the DVD/HDTV Receiver using a coaxial RF cable.
ote
There might be some areas where the signal strength could be too high. If so, you may need to connect the
antenna to an optional attenuator. Screw the attenuator onto the “ANT IN” jack. (Refer to page 12.)
2
2
Connect the “ANT LOOP OUT” jack on the DVD/HDTV Receiver to the “Antenna In” jack on your TV using a
coaxial RF cable.
3
3
Connect the “RGB OUT” jack on the DVD/HDTV Receiver to the “RGB IN” jack of your TV using VGA-type con-
nector. (The Output Selection must be set to RGB, refer to Setting the Display Format on page 19)
4
4
Connect the L/R “AUDIO OUT” jacks on the DVD/HDTV Receiver to the L/R “AUDIO IN” jacks on your TV using
RCA-type cables.
ote
The
RGB output is
useable if 1080i, 720p, 480p, native, variable 1, variable 2, or variable 3 display for-
mat is selected.
Cable TV
Wall Jack Panel
OR
L
R
AUDIO INPUT
RGB INPUT
VIDEO
INPUT
S-VIDEO
INPUT
ANTENNA
INPUT
HD Ready TV Connection Panel
DVD/HDTV Receiver Connection Panel
Antenna