LG LST-3510A - Manual (Page 53)

REFERENCE
53
Programming the Remote Control to Operate Other Devices
The DVD/HDTV Receiver remote control is a multi-brand or universal remote
control that can be programmed to operate most IR remote-controllable
devices from other manufacturers.
ote
The remote control may not be able to control all models of other brands.
11 Test your remote control.
To find out whether your remote control can operate a device without
programming, turn on the device such as a VCR. Select the correspon-
ding mode (VCR) with the MODE button on the remote control. While
pointing at the device, use the POWER and CH +/– buttons to determine
if you can operate the device. If not, the remote control requires pro-
gramming.
2 2 Turn on the device to be programmed. Select the corresponding
mode (DVD, TV, CATV or VCR) with the MODE button on the remote
control.
3 3 Press the POWER button and the MUTE button simultaneously.
The remote control is now ready to program the code for the device.
4 4 There are two ways to find the correct code for the device.
First Method: If you press the CH + button repeatedly, the codes will
change one at-a-time. When the right code is found, the device will turn
off.
Second Method: Enter the code number using the number buttons on
the remote control. The right code numbers for the corresponding device
can be found on the following pages. If the code is correct, the device
will turn off.
5 5 Press the EXIT button to store the programming code.
6 6 Test the remote control functions to see if the device responds
properly. If not, repeat from step 2.