Lyngdorf Audio SDAI 2175 - Manual (Page 11)

1 1
Menu Tree
SDAI 2175 Main Menu
RELVOL
Relative Volume
SENSIT
Sensitivity
BRIGHT
Brightness
IR RMT
IR Remote
INPTXT
Select Input Text
LNKID
Link Address
LNKSP
Link Comm. Speed
BAL LR
Balance Left Right
DEFVOL
Default Volume
MAXVOL
Maximum Volume
Fig. 1.
RELVOL - Relative Volume
RELVOL
Relative Volume
Relative volume for the active input. Fine tuning of the volume control for each input relative to the
global setting. The Sensitivity can be adjusted +/-6dB in 0.1 dB steps.
SENSIT - Sensitivity
SENSIT
Sensitivity
Input amplifi er sensitivity 0 or +6 dB for the active input. Used for increasing the sensitivity for weak
sources in the preamplifi er section without increasing noise level.
BRIGHT - Brightness
BRIGHT
Brightness
Brightness of Display from 0 (Display off) to max intensity 4.
IR RMT - IR Remote
IR RMT
IR Remote
Enable / Disable of remote control, Remote can be disabled if the SDAI 2175 is controlled over RS232
interface.
INPTXT - Select Input Text
INPTXT
Select Input Text
Selection of input text for the active input. Selection can be chosen between a range of predefi ned
strings or from 7 user defi ned strings which can be entered with the Lyngdorf SDAI 2175 Control soft-
ware.