Lyngdorf Audio SDAI 2175 - Manual (Page 4)

4
Operating Voltage
The SDAI 2175 is available in a version for 115V mains voltage and in a version for 230V mains voltage.
Check the label on the SDAI 2175 rear panel and verify you have the version with the proper voltage for
your area.
The 115V version requires a mains voltage of 100V-120V at 50-60Hz with a current rating of 8A.
The 230V version requires a mains voltage of 200V-240V at 50-60Hz with a current rating of 4A.
The mains voltage setting for your SDAI 2175 can be changed ONLY BY A QUALIFIED ENGINEER.
Connect the power input only to the AC source printed on the label. The warranty
will not cover any damage caused by connecting to the wrong type of AC mains.
Unpacking the SDAI 2175
Carefully remove the unit and accessory kit from the carton, visually check for shipping damage. Contact
both the shipper and Lyngdorf Audio immediately if the unit bears any sign of damage from mishandling.
All Lyngdorf Audio equipment is carefully inspected before leaving our factory.
Keep shipping carton and packing material for future use or in the unlikely event that
the unit needs servicing. If this unit is shipped without the original packing, damage
could occur and void the warranty.
Serial Number Registration
Please record the serial number of your amplifi er here for future reference. The serial number is printed
on the label on the SDAI 2175 rear panel. You will need this serial number, should you ever require
service for your SDAI 2175 power amplifi er.
SDAI 2175 serial number: _____________________