Lyngdorf Audio SDAI 2175 - Manual (Page 17)

1 7
Protection
Parameter Value Note
Grounding Mains earth, chassis and audio
ground are connected internally.
Output short circuit current ±40A
Output DC voltage ±5V @ <0.1Hz
Over temperature All heat sinks and mains-trans-
former.
Auto resetting thermal fuse in
mains transformer.
Mains
Parameter Value Note
Mains input connector IEC 320 cold type Mains lead supplied.
Mains voltage range 100-120V AC, 50–60Hz 115V version
Mains voltage range 200-240V AC, 50-60Hz 230V version
Internal mains fuse 8 Amp 115V version
Internal mains fuse 4 Amp 230V version
Power consumption 1.5 W STANDBY mode.
Power consumption 35 W OPERATE mode, no output.
Power consumption 116 W 2*37.5W/4ohms.
Power consumption 820 W 2*300W/4ohms.
Trigger
Parameter Value Note
TRIGGER OUT connector 3.5mm (1/8”) mono jack Case=Gnd, Tip=Input
TRIGGER OUT Voltage 12V DC Short circuit protected
Mechanical
Parameter Value Note
Width 450mm (17.72”)
Depth 355mm (13.98”) Including loudspeaker connec-
tors.
Height 100mm (3.94”) Including feet.
Net weight 13.0Kg (28.66lb.)
Shipping weight 16.0Kg (35.27lb.)