Lyngdorf Audio SDAI 2175 - Manual (Page 13)

1 3
Software
Lyngdorf Audio supplies control software for remote control of the SDAI 2175 and setup of the Input text
system. Please check the Lyngdorf audio web site for download of the newest version at http://www.
Lyngdorf.com
The SDAI 2175 fi rmware can be upgraded using the ‘Lyngdorf Serial Load, software upgrade tool’ this is
in the PC package available from www.Lyngdorf.com
Follow the upgrade steps to bring the product into boot mode. Only one device should be connected to
the PC when upgrading the fi rmware.
Upgrade steps:
Make sure that a serial cable is connected between PC and amplifi er or CD.
Select File to upload.
Check Comm Adress and COM port
Click ´Open Comm port´.
Start Amplifi er or CD in boot mode.
Upload new software
Wait for Amplifi er or CD to Initialize
Bootmode:
Turn power Off on the front button.
Press both volume buttons simultaneously and hold them while turning On the power.
Release both volume buttons and SDAI 2175 is in bootmode.
1.
2.
3.
4.
5.
6.
7.